NOTE: Dies on this page cannot be ordered online. For any diameters within this range, please contact our sales office. The price of standard dies within this range is £99.60 each + VAT
The die o/d in this range is 4.7/16” (112.72 mm) to fit into bolster frame type 2 only
Round Punches & Dies
Round punches & dies can be supplied in two different styles – please see Type A & Type B below:
Type A: Up to 2″ or 50.8 mm dia., these have a 9/16″ dia. ground shank to fit punch holder type I. The punches are machined with a small centre point for location in centre-punched marks. If the material has been pre-drilled the punch can be supplied with a location pilot which is removable if necessary.
Type B: Over 2″ or 50.8 mm punches are made with a 1″ ground shank. These punches are bored with a centre hole through which the screwed spigot of punch holder type K passes. A counter-bored recess in the punch accommodates a nut which locks the punch firmly to the holder. The punch is prevented from turning by a dowel in the face of the holder, which locates in the back of the punch. The centre point or pilot is screwed into the end of the spigot.
Any diameter size can be made to your exact dimensions.
Standard punches are suitable for punching through 16 to 20 swg mild steel. If you require punches & dies for any other material thicknesses, please contact us.
We stock and supply a vast range of punches and dies to suit all types of machinery and applications. We can supply standard round, square, rectangular and radius end punches & dies, in sizes ranging from 2.0 mm to 90.0 mm or larger. We can also design and manufacture special tooling to meet any requirement, or make tooling to your drawing and specification. We stock and supply notching tools, radius cropping tools, louvre tools, twin radius tools, or any other shapes such as triangular, hexagon, slots, keyholes, etc. Please contact our sales office with your specifications, sketches or technical drawings.
Please go to ‘Additional Information’ tab for further info.