Select Page

Model No. DL Notching Tool

£624.00 (excl. VAT)

A leg guided tool or cutting rectangular pieces up to 2.1/4″ x 2.1/8″ deep in one operation from the corners of sheet metal panels prior to bending.

Out of stock

Description

A leg guided tool or cutting rectangular pieces up to 2.1/4″ x 2.1/8″ deep in one operation from the corners of sheet metal panels prior to bending. It can also, by a series of cuts, be used for producing notches larger than its own size. The die size is made to fit direct into the type 2 frame (supported by ring H) and the top tool is bored to suit punch holder K. Special notch tools can be made to suit customer requirements.

MADE TO ORDER. These tools are made to order and are not available from stock. Please contact our sales office for a lead time.

Additional information

Weight 2 kg
  • ALU = aluminium
  • ABS = acrylonitrile butadiene styrene
  • CVS = chrome vanadium steel
  • EPDM (EPT) = ethylene propylene diene Monomer
  • HPDE = high density polyethylene
  • LDPE = light density polyethylene
  • MDPE = medium density polyethylene
  • M.S. = mild steel
  • NBR = nitrile butadiene rubber
  • PE = polyethylene
  • POM = polyoxymethylene
  • PP = polypropylene
  • PPS = polyphenylene sulphide (better known as Ryton)
  • PTFE = polytetrafluoroethylene (better know as Teflon)
  • PU = polyurethane
  • PVC = polyvinyl chloride
  • PVDF = polyvinylidene fluoride
  • SS = stainless steel
  • BP = burst pressure
  • HP = high pressure
  • WP = working pressure
  • cSt = centistokes
  • i/d = inside diameter
  • o/d = outside diameter
  • swg = standard wire guage (i.e. the ‘guage’ or thickness of a piece of steel)
  • BSF = British standard fine
  • BSP = British standard pipe
  • BSPF = British standard pipe – female thread
  • BSPM = British standard pipe – male thread
  • BSW = British standard Whitworth
  • UNF = Unified fine thread

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.