Model HS/1 Hand Swaging Machine
Designed specifically for the production of Lobster Back Bends. The guide allows both internal and external curves to be swaged.  Supplied with three pairs or swage wheels in widths of 1/4", 3/8" and 1/2".

• Capacity in mild steel (45kg /sq mm) 0.8mm
• Nett weight 9kg

Model HJ/2 Hand Jenny Machine
Designed for making and slightly turning an edge in straight, curved or cylindrical work. Complete with a hardened adjustable guide fitted to the side of the machine to maintain the edge width.

• Capacity in mild steel (45kg /sq mm) 1.0mm
• Bottom wheel diameter 55mm
• Nett weight 8kg

Model EFM/20/25 Hand Flanging Machine
Designed for forming right angle flanges 6.5mm wide on curved, straight or irregular shapes, with a minimum radius of 75mm. Complete with an angled table for flat work, which may be readily removed when cylinders require to be flanged.

• Capacity in mild steel (45kg / sq mm) 1.0mm
• Nett weight 9kg

Model CRP/24 Hand Crimping Machine
Designed to crimp a tube to reduce its diameter to allow it to slide over a tube of the same original diameter. The furnace collar swage restricts the distance one tube slides into another. The machine is complete with both crimping and furnace collar wheels. Should however only a crimp effect be required, the furnace collar wheels can be removed and replaced by two spacers provided.

• Capacity in mild steel (45kg /sq mm) 0.5mm
• Minimum tube diameter 65mm
• Swage size 12.7mm wide x 6.3mm deep
• Crimp size 35mm long x 8.4mm pitch
• Nett weight 10kg