Select Page
AOP9721
AOP9721AOP9721HAOP9721N

Model Nos. AOP9721 – AOP9721H – AOP9721N Pneumatic / Air-Operated Pumps

£109.95£139.95 (excl. VAT)

A range of best quality, general purpose, high output 1:1 ratio pneumatic pumps for low to medium viscosity oils and a vast range of other fluids including chemicals and Adblue. 

Clear

Product Description

General purpose air-operated barrel pumps

  • Fluid: low to medium viscosity oils ~ mineral & synthetic motor oils ~ diesel ~ fuel oil ~ hydraulic oil ~ antifreeze ~ transmission fluid ~ Adblue ~ water ~ coolant ~ alcohols ~ kerosene ~ water-based acids & alkaline solutions
  • Viscosity: 100 cSt / SAE10-30
  • Flowrate: 30 litres per minute
  • Ratio: 1:1
  • Inlet: 1″ BSPF
  • Outlet: 1″ BSPM
  • Air inlet pressure PSI: 100 max.
  • Output pressure BAR: 1
  • Output pressure PSI: 80-100
  • Fitting: 2″ BSP barrel adaptor
  • Riser tube: rigid to suit to suit 210 litre barrel

 

NOTE:

  • Air connectors NOT supplied

Model No. AOP9721

  • Outlet: 1″
  • Weight: 1.7 kg

Model No. AOP9721H

  • Outlet: 2 metres x 1″ bore reinforced nylon hose & bent tip nozzle
  • Weight: 3.4 kg

Model No. AOP9721N

  • Outlet: as AOP9721H but fitted with TNAD trigger nozzle
  • Weight: 3.4 kg

 

The compression of a pneumatic pump is the direct ratio between the pressure of the compressed air introduced, and the pressure leaving the pump. e.g.: a pump with a compression ration of 5:1 –

Air pressure introduced at 1 bar will output fluid at about 1 x 5 = 5 bar

Air pressure introduced at 6 bar will output fluid at about 6 x 5 – 30 bar

  • ALU = aluminium
  • ABS = acrylonitrile butadiene styrene
  • CVS = chrome vanadium steel
  • EPDM (EPT) = ethylene propylene diene Monomer
  • HPDE = high density polyethylene
  • LDPE = light density polyethylene
  • MDPE = medium density polyethylene
  • M.S. = mild steel
  • NBR = nitrile butadiene rubber
  • PE = polyethylene
  • POM = polyoxymethylene
  • PP = polypropylene
  • PPS = polyphenylene sulphide (better known as Ryton)
  • PTFE = polytetrafluoroethylene (better know as Teflon)
  • PU = polyurethane
  • PVC = polyvinyl chloride
  • PVDF = polyvinylidene fluoride
  • SS = stainless steel
  • BP = burst pressure
  • HP = high pressure
  • WP = working pressure
  • cSt = centistokes
  • i/d = inside diameter
  • o/d = outside diameter
  • swg = standard wire guage (i.e. the ‘guage’ or thickness of a piece of steel)
  • BSF = British standard fine
  • BSP = British standard pipe
  • BSPF = British standard pipe – female thread
  • BSPM = British standard pipe – male thread
  • BSW = British standard Whitworth
  • UNF = Unified fine thread

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

There are no products