Select Page
AOPO70
AOPO70AOPO70H

Model Nos. AOP070 – AOP070H – AOP105 – AOP105H Pneumatic / Air-Operated Pumps

£280.00£499.00 (excl. VAT)

A range of best quality, high pressure, 3:1 & 5:1 ratio pneumatic pumps for low to medium viscosity oils and fluids. 

Clear

Product Description

High pressure air-operated barrel pumps

  • Fluid: low to medium viscosity oils ~ mineral & synthetic motor oils ~ hydraulic oil ~ antifreeze ~ transmission fluid
  • Viscosity: 100 cSt / SAE10-30
  • Inlet: 1/4″ BSPF
  • Air inlet pressure PSI: 100 max.
  • Fitting: 2″ BSP barrel adaptor
  • Riser tube: rigid to suit to suit 210 litre barrel

NOTE:

  • Air connectors NOT supplied
  • NOT to be used with petrol, diesel or fuel oils

Model No. AOP070

  • Ratio: 3:1
  • Output pressure BAR: 168
  • Output pressure PSI: 2100
  • Flowrate: 10 litres per minute
  • Outlet: 1/2″ BSPF swivel
  • Weight: 6.6 kg

Model No. AOP070H

  • As AOP070 but fitted with 4 metres x 3/8″ bore reinforced oil hose & oil control nozzle
  • Weight: 9.4 kg

Model No. AOP0105

  • Ratio: 5:1
  • Output pressure BAR: 280
  • Output pressure PSI: 3500
  • Flowrate: 22 litres per minute
  • Outlet: 1/2″ BSPF swivel
  • Weight: 10 kg

Model No. AOP0105H

  • As AOP0105 but fitted with 4 metres x 3/8″ bore reinforced oil hose & oil control nozzle
  • Weight: 12.8 kg

 

 

The compression of a pneumatic pump is the direct ratio between the pressure of the compressed air introduced, and the pressure leaving the pump. e.g.: a pump with a compression ration of 5:1 –

Air pressure introduced at 1 bar will output fluid at about 1 x 5 = 5 bar

Air pressure introduced at 6 bar will output fluid at about 6 x 5 – 30 bar

  • ALU = aluminium
  • ABS = acrylonitrile butadiene styrene
  • CVS = chrome vanadium steel
  • EPDM (EPT) = ethylene propylene diene Monomer
  • HPDE = high density polyethylene
  • LDPE = light density polyethylene
  • MDPE = medium density polyethylene
  • M.S. = mild steel
  • NBR = nitrile butadiene rubber
  • PE = polyethylene
  • POM = polyoxymethylene
  • PP = polypropylene
  • PPS = polyphenylene sulphide (better known as Ryton)
  • PTFE = polytetrafluoroethylene (better know as Teflon)
  • PU = polyurethane
  • PVC = polyvinyl chloride
  • PVDF = polyvinylidene fluoride
  • SS = stainless steel
  • BP = burst pressure
  • HP = high pressure
  • WP = working pressure
  • cSt = centistokes
  • i/d = inside diameter
  • o/d = outside diameter
  • swg = standard wire guage (i.e. the ‘guage’ or thickness of a piece of steel)
  • BSF = British standard fine
  • BSP = British standard pipe
  • BSPF = British standard pipe – female thread
  • BSPM = British standard pipe – male thread
  • BSW = British standard Whitworth
  • UNF = Unified fine thread

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

There are no products