Treadle Guillotine Shears

Features:

• Double-edged blades for cutting mild and most grades of stainless steel
• Front extension arms
• Front gauge
• Manually operated push-pull back gauge
• Bedside guides
• Spring loaded neoprene lined hold-down

Optional Equipment:

• Rack and pinion parallel motion back gauge with dual metric/imperial scale
• Battery operated LCD display for rack and pinion back gauge. Metric/imperial display
• Extended squaring guide with flip over stop and dual metric/ imperial scale length 1 or 2 metre Strip-line lighting
• Double-edge D2 alloy blades
• Guarding to European CE directive

Bench Tube Forming Rolls

A range of hand operated bench mounted machines with small diameter rolls. Designed for rolling thin gauge and soft material, they are particularly suited for the manufacturer of filters. The material is formed around the top roll which is held in tension at one end, upon removal of the link arm, the roll lifts upwards enabling the formed tube to be removed. The roll can then be returned to its original position without the need of adjustment, making fast repetition work possible.

Alternative roll lengths can be offered on request.

Bottom Slip Hand Bending Rolls

Features:

• Bottom roll swings out for easy removal of completed cylinder
• Top and bottom rolls driven
• Carbon steel rolls give high resistance to deflection
• Top and back rolls grooved for wired edges
• Geared drive on 4” and 5” machines for easy operation
• Longitudinal groves cut in bottom roll on 5” machines to assist in aligning
• Fully guarded to Health and Safety Regulations
• Available in non standard lengths to customers requirements

Top Slip Hand Bending Rolls

Features:

• Top Slip formation enables production of infinite diameter cylinders
• Counterbalanced top roll swings out for easy removal of closed cylinders
• Carbon steel rolls give high resistance to deflection
• Work-piece clamped and released by single movement of clamping lever
• Back roll adjusted from front of machine with numerical indicators of position, for accurate setting. (This is an optional extra on machines with 2” or 3”daimeter rolls)
• Top and bottom rolls driven
• Geared drive on models TSR/4 and TSR/5 for easy operation
• Bottom and back rolls grooved for wired edges
• Longitudinal grooves in model TSR/5 to assist in alignment and grip
• Back roll can be tilted to enable the production of cones when fitted with the cone rolling attachment-see optional equipment

Optional Equipment:

• Parallel motion to back roll
• Drive to back roll
• Cone rolling attachment
• Hardened or coated rolls

Light Duty Inclined Blade Folding Machines

These folders provide an economical alternative to heavier machines and are equipped with all the features necessary for performing a wide range of box and pan or straight folding operations. Model LBPFM/50/16 is a floor-mounted machine, whereas model BPFM/24/18 may be either bench or floor mounted and can be easily transported in a car or van.

Features:

• Vertical and horizontal adjustment of top beam for different material thickness
• Vertical adjustment of swing beam for radius bends
• Removable swing beam blade for narrow return bends

Optional Equipment:

• Floor Stand (for model BPFM/24/18)
• Back gauge
• One-piece blade

Straight and Box & Pan Folders (610mm to 2000mm)

Features:

• Easily adjustable top beam for different material thickness
• Removable angle blade for narrow return bends
• Clamping beam raised from both ends of machine
• Self- supporting top beam for safety
• Adjustable swing beam for radius bends
• Angle stop for repetition bends
• Back gauge with angular adjustment

Optional Equipment:

• Special fingers to customer requirements
• Radius blades
• Rack and pinion back gauge
• Bench stand (only on 24”)
• Independent clamping from either end of machine

HFM MODELS ARE STRAIGHT FOLDING MACHINES
BPFM MODELS ARE BOX & PAN FOLDING MACHINES

Straight and Box & Pan Folders (2000mm to 4000mm)

Features:

• Torsion bars to top and bottom beams to ensure accurate folds over full working length
• Removable angle blade for narrow return bends
• Available with flat or inclined fingers on box and pan models
• Easily adjustable top beam for different material thickness
• Counter-balanced folding beam for easy operation
• Clamping beam raised from both ends of machine
• Self- supporting top beam for safety
• Adjustable swing beam for radius bends
• Angle stops for repetition bends
• Back gauge with angular adjustment

Optional Equipment:

• Special fingers to customer requirements
• Radius blades
• Rack and pinion back gauge
• Front gauges with disappearing stops
• Independent clamping from either end of machine

HFM MODELS ARE STRAIGHT FOLDING MACHINES
BPFM MODELS ARE BOX & PAN FOLDING MACHINES