Lubrication equipment for all grease requirements, from grease guns, grease nipples and grease hoses through to air-operated grease pumps
Greasing Equipment - MacNaught
K32 Flexigun
Superior quality single hand grease gun.
400 gms/14.5 oz
7500 psi
Premium 4-jaw coupler
Bulk or cartridge
Delivers 0.8 gm per shot
Filler/bleeder nipple
Weight 1.7 kg
K32FGK1
K32 Flexi Greasing Kit in protective case, comprising:
K32 flexigun
Straight needlepoint coupler
Right angle coupler
Rigid extension
Injection needle
Plastic carrying case
Weight 3.3 kg
K40
Superior quality side lever grease gun.
400 gms/14.5 oz
10,000 psi
Premium 4-jaw coupler
Bulk or cartridge
Delivers 1.5 gm per shot
Filler/bleeder nipple
Weight 1.5 kg
K3 Pressure Greasers
The K6 and K3 pressure greasers are ideal for lubricating the most inaccessible nipples. The pre-pressurised system allows the containers to be left on the ground while the KR gun is used high up or underneath the plant or equipment being greased.
K3
12.5 kg 'Superlube' grease keg lid & pump outfit
Follower plate & dirt filter
Pressure up to 10,000 psi
One 'push-down' of pump pressurises system to grease 80 nipples
3 metres delivery hose with gun
Carrying handle
Retaining bracket for KR gun
Weight 7 kg
Drum not included
K6 Pressure Gun
3 Kg 'Minilube' grease keg lid and pump outfit
Follower plate and dirt filter
Pressure up to 10,000 psi
One 'push-down' (by foot or hand) of pump pressurises system to grease 30 nipples
2 metres delivery hose with KR gun
Carrying handle
Retaining bracket for gun
Weight 3.5Kg
Models P3 & P6 Air Operated Greasing Equipment
These air-operated greasers deliver 5000 psi at the recommended air pressure of 100 psi. By squeezing the trigger gun this can be boosted to 10,000 psi.
P3
Air-operated 12.5 kg 'Powerlube' grease keg & lift pump outfit
50:1 ratio air motor (no airline lubricator required)
Air requirement of 3 cfm at pressures of between 60 & 120 psi
4 metres delivery hose
B2 Booster gun with 360º 'Z' swivel provides pressure up to 10,00 psi
Follower plate & dirt filter
Retaining bracket for B2 gun
Weight 7.8 kg
Drum not included
P6
Air-operated 50 kg 'Maxilube' grease keg & lift pump outfit
Same specification as P3 but fits 50 kg grease kegs
Weight 10.6 kg
B2
Standard fitting to P3 and P6
Available as spare replacement
¼" BSPF inlet thread with 'Z' swivel
Spares for Macnaught
Spares are available for all MacNaught equipment and allow the product life to be extended indefinitely, a worthwhile exercise for such high quality products.
The commonest spares kits are:
K31K Repair kit for K3 pump
K63K Repair kit for K6 pump
P21K Repair kit for P2 & P5 air motor
KR1K Overhaul kit for KR gun
B21K Repair kit for B2 gun
KH43 Hose assembly for K3
KH40S Hose assembly for K6
Please apply to our sales office for further details and prices.